|
| 貨號 | Paratherm HE heat transfer fluid |
| 品牌 | Paratherm HE heat transfer fluid |
| 是否危險化學(xué)品 | 否 |
| 型號 | Paratherm HE heat transfer fluid |
| 產(chǎn)品等級 | 其他 |
| 包裝規(guī)格 | 桶 |
| CAS編號 | |
| 純度 | 98% |
| 別名 | Paratherm HE heat transfer fluid |
| 密度 | 1.3g/cm3 |
| 產(chǎn)地/廠商 |
Paratherm HE heat transfer fluid is an economical, highly-refined, mineral-oil based heat transfer fluid formulated for service in closed-loop heat transfer systems to 600°F.
| Minimum Startup Temp (300cSt) | Maximum Operating Temp |
|---|---|
| 37°F / 3°C | 630°F / 332°C |
As shown by its almost water-white appearance, Paratherm HE Heat Transfer Fluid has an extremely low level of impurities. This is the result of the extended processing required to achieve its HT1 Rating-approved for incidental food contact by NSF-which removes the impurities that can catalyze fluid degradation. These impurities (such as aromatics, asphaltenes, and sulfur-bearing compounds) give lesser quality mineral-oil based fluids a slight to moderate yellow color.
Any vapors that are given off by a heat transfer fluid inside a vented expansion tank will react with air to produce the acids that eventually can cause sludge formation and fluid gelling. The higher the vapor pressure, the more vapor is produced and the greater the rate of oxidation. Paratherm HE Heat Transfer Fluid has a negligible vapor pressure that produces almost no reaction with air in vented expansion tanks.
